2024 Chris Craft Launch 27 Base
- Year 2024
- Make Chris Craft
- Model Launch 27
2024 Chris Craft Launch 24
The Position of Power.A wide captain’s chair puts you in control behind gleaming gauges and a rich, mahogany steering wheel. The luxurious diamond-pattern stitching is complemented by a thick stainless steel bar. And a thigh bolster brings added height and visibility.
Features may include:
- Teak - Beverage Holder Accents
- Teak - Bow Accents w/ Stainless-Steel Inserts & Chris-Craft Stainless-Steel Logo
- Teak - Cockpit Steps
- Teak - Engine Hatch Walk-Over
- Teak - Foredeck and Anchor Locker
- Teak - Helm Footpad / Footrests
- Teak Maintenance Kit
- Black Teak Caulk Color
- 5 Year - Component Warranty
- 3 Year - Canvas/Upholstery Warranty
- 5 Year - Transferable Warranty
- Air Intakes – Stainless Steel
- Anchor - Bow Locker in Teak (Includes Chris-Craft Logo Inlay)
- Bow Scuff Plate – Stainless Steel
- Certifications and Standards - NMMA, ABYC, USCG
- Color Selections - Boot Stripe, Multiple Color Selections
- Color Selections - Hull Side, Gelcoat Ivory Cream
- Deck Fill Plates – Stainless Steel
- Deck - Diamond Pattern Non-Skid, Fiberglass
- Flag/Pennant - Embroidered Chris-Craft and US Flag Kit w/Stainless Steel Magnetic Pole and Base
- Gunnel Trim Rubrail - Molded PVC w/Stainless Steel Insert
- Hardware – Stainless Steel Bow and Stern Eyes
- Hardware – Stainless Steel Bow Light Cover
- Hardware - Chrome Plated Stainless Steel Fasteners
- Hardware - Stainless Steel Mooring Cleats
- Hardware – Stainless Steel Thru-Hull Fittings
- Hull – Chris-Craft Trademark Tumblehome Design
- Hull - Deep V Bottom w/Flared Bow
- Hull - Deck Joint - Mechanically, Chemically Bonded
- Hull - Stringer System and Liner, 1 Piece Fiberglass Foam Filled for Floatation and Noise Reduction
- Swim Platform Ladder - 3 Step, Stainless Steel, Hidden
- Swim Platform Grabhandle – Stainless Steel
- Top - Bimini Canvas Top w/ Stainless-Steel Bows
- Trim Tabs - Lenco w/Indicators
- Ventilation Grates - Stainless Steel
- Beverage Holders - Stainless Steel
- Bolsters - Padded Gunwale Mounted
- Door - Wind, Hinged, Folds to Deck in Bow Area
- Drains – Stainless Steel
- Grabrails – Stainless Steel
- Helm - Compass, Dash Mounted
- Helm - Dash, Gauge and Switch Panels w/Silver Perforated Panels
- Helm - Digital Gauge Package, Chris-Craft Branded
- Helm - Electronics Pkg, Garmin 7” Multifunctioni Display w/ Chart Plotter & DF
- Helm - Engine Controls, Electronic Control - EVC/DTS/DEC
- Helm - Engine Control, Chrome, Side Mounted
- Helm Flush Mounted Electronics
- Helm – Electric Single Trumpet Horn
- Helm - Ignition Safety Switch(es)
- Helm – Stainless Steel Model Designator
- Helm – Mahogany Steering Wheel
- Helm - Steering, Tilt w/Power Assist
- Helm - Stereo Remote, MP3/USB Inputs w/Fusion Bluetooth Enabled
- Lighting - LED Courtesy
- Outlets/Input - 12v Accessory Outlet(s)
- Outlets/Input - USB Auxiliary Input
- Seating - Aft Cockpit, Port and Starboard Rear Facing Sun Lounger
Dimensions
Overall Length
W/ Swim platform: 26'8" (8.13 m) | W/o Swim platform: 24'10" (7.57 m)
Overall Height
5'9" (1.75 m)
Length
Centerline: 23'8" (7.21 m) | Waterline: 21'8" (6.6 m) | Hull: 25'3" (7.7 m)
Beam
Maximum: 8'6" (2.6 m) | Transom: 7'7" (2.31 m) | Waterline: 5'7" (1.7 m)
Center of Gravity
Forward of Transom Keel: 5'8" (1.73 m)
Dead Rise
20°
Draft
Draft Prop Raised: 17" (43 cm) | Draft Prop Lowered: 36.5" (92 cm)
Bridge Clearance
Windshield: 53" (1.35 m)
Dimensions
Freeboard Forward: 40" (1.01 m) | Freeboard at Half Length: 34" (86 cm) | Freeboard Aft: 24.5" (62 cm) | Transom Angle: 13°
Capacities
Fuel Capacity
77 gal (291 l)
Seating Capacity
Max: 10 Persons
Fresh Water Capacity
9 gal (34 l)
Weights
Dry Weight
6,000 lbs (2,722 kg)